Make That A Double, HAL

enews

CARROLLTON, OH—A new robot from Motoman Inc. performs assemblies both straight-up and on the rocks.

The RoboBar automated bartender comes equipped with a pair of five-axis manipulator arms and is mounted on a rotating base that provides an 11th axis of motion, providing highly flexible movement. The end-of-arm tooling consists of simple parallel grippers, which allow it to serve up draft beer, mixed drinks, soda and juices.

The system uses a magnetic card scanner to authorize drink service. After a valid card swipe, the customer uses a touch screen to pick his poison. The robot then selects a cup, pours the drink and adds ice to the customer's taste. It even gives mixed drinks a little shake to make sure everything is well mixed. The robot then passes the drink to the customer via an automatic turntable located at the side of the cell.

"RoboBar doesn't mind late hours or long shifts, and doesn't complain about the lack of tips. RoboBar also will never show up late, drink on the job, dip into the till, or be rude to customers," says Carl Traynor, Motoman's senior director of marketing. "Smoke doesn't bother the robot, and it never has a bad attitude."

The complete automated bar includes the robot, dispensers for beer, soda and juices, cups, and ice. (Add your own whiskey.) The robot's "personality" can be customized to provide information on a company or products or humorous quips. A safety enclosure is also included, and the robot is directed via an NXC100 controller housed in its base. Most important of all, it looks real sharp in a vest and bow tie.

The automated bar is available for purchase or lease. For more information call 937-847-6200 or visit www.motoman.com.

You must register or login in order to post comments.

Multimedia

Videos

Image Galleries

Wire Harness

AssemTech Inc. is a busy and growing harness assembly shop in West Chicago, IL. The company has a 12,000-square-foot assembly area and employs 20 full-time harness assemblers - far cry from its early days back in 1986, when founder Chuck Hall and various family members assembled harnesses in his garage.

Podcasts

A Plan to Revive U.S. Manufacturing
In December, the nonpartisan Council on Competitiveness issued a landmark report, Make: An American Manufacturing Movement, that provides dozens of recommendations for addressing the many challenges facing U.S. manufacturers. In this podcast, Jack McDougle, the council’s senior vice president for manufacturing, discusses the council’s vision for reviving U.S. manufacturing. Check out this sneak preview of McDougle’s May 2 keynote address to start Tech ManufactureXPO.

More Podcasts

THE MAGAZINE

Assembly Magazine

may 2012 cover

2012 May

Check out Assembly's May issue!!

TABLE OF CONTENTS SUBSCRIBE

Lean Hang-Ups

By now, most assembly plants have at least tried lean manufacturing. But, some aspects of lean have been easier to implement than others. What tenet of lean has your assembly plant had the most trouble with?
See Poll Results Poll Archive

THE ASSEMBLY MAGAZINE STORE

welding.gif
Welding: Principles & Practices

This text introduces students to a solid background in the basic principles and practices of welding.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Assembly Showrooms

ASSEMBLY Showrooms

STAY CONNECTED

Facebook Twitter  LinkedIn  YouTube