Assembly in Action / Automotive Assembly / Automated Assembly / Screwdriving and Riveting Assembly / Columns / Robotics Assembly

Colleague Robot Ensures Flawless Car Seat Assembly

At Lear Corp.’s production facility in Besigheim, Germany, multiple shifts of workers assemble car seats just-in-time.

March 1, 2013
Trans

At Lear Corp.’s production facility in Besigheim, Germany, multiple shifts of workers assemble car seats just-in-time. Assemblers must work quickly while meeting strict quality requirements.

For the past two years or so, a robot has helped the workers produce high-quality, error-free seats. The UR5, made by Danish manufacturer Universal Robots, screws together the seat and rest frames just prior to final assembly. Operating around the clock in three shifts, the robot locates, measures and tightens nearly 8,500 screws every day, resulting in shorter throughput time and greater process reliability.

Because its assemblers had limited automation experience, Lear selected a robot that is low maintenance, and easy to control and program. Equally important, the company needed a small, mobile robot that could be used alongside humans in a limited-space production area.

Systems integrator Faude Automatisierungstechnik recommended Lear use the UR5, a six-axis robot that weighs just 18 kilograms. It has a reach of 85 centimeters and a lifting capacity of 5 kilograms. Faude knew that Lear would like the robot’s intuitive user interface.

Programming is done by either pressing arrow keys on a touchpad (indicating where the robot should move) or grabbing the robot arm and showing it how to perform a certain action. This simplicity enabled Lear to familiarize employees with the robots in only one day.

Lear also likes that the robot can be used directly alongside humans without any safety shielding. As soon as an employee comes in contact with the robot arm and a force of at least 150 newtons is exerted, the robot arm automatically stops operating. This safety mode is in accordance with the European ISO standard.

The UR5 is installed above a conveyor belt. Workers manually position screws on both sides of the seat before placing it on the conveyor. The seat also is equipped with a transponder containing individual identification data.

When the seat passes the robot, it reads the transponder and tightens the screws using an attached electric screwdriver. Process data is documented by the screwdriver, which applies up to 35 newton-meters of torque at a prespecified rotational angle.

“Because the seats can be in slightly different positions, the robot uses a Flexvision image processing system that locates each screw within a grid of 50 millimeters square,” says Esben Ostergaard, chief technology officer of Universal Robots. “Using 2D measurements and a camera, the robot quickly positions the bit exactly on the head of the screw at the correct angle of rotation.”

The image processing system also enables the robot to immediately spot errors. For example, if screws are missing on a seat, the robot issues an error notification. A Lear employee then moves the seat to a reworking station and manually installs the missing screws.

Ostergaard says the robot and vision system cost nearly 50,000 Euro ($67,000)—but that amount was recouped after just a few months. He says that, thanks to the UR5’s energy-efficient design, ongoing operating costs are manageable.

Lear is examining whether it can integrate the same car-seat assembly system into the company’s other production plants across Europe. The company is also considering using the UR5 for other processes, including joining, bonding and sawing.

For more information on lightweight robots, call 631-610-9664 or visit www.universal-robots.com.

Did you enjoy this article? Click here to subscribe to Assembly Magazine.

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Behind the Scenes at Ford's Michigan Assembly Plant

People are the heart and soul of the 2012 Assembly Plant of the Year. This slideshow shows some of the men and women who build three different types of electrified vehicles alongside traditional gas-powered cars on the auto industry’s most flexible assembly line—Ford’s Michigan Assembly Plant in Wayne, MI. Photos courtesy Ford Motor Co.

Podcasts

Live from The Assembly Show, the hosts of Manufacturing Revival Radio sit down with Adam Malofsky, Ph.D., president and CEO of Bioformix to discuss his company’s innovative, energy-saving adhesives and polymers, which cure without the need for heat or light. 

More Podcasts

THE MAGAZINE

Assembly Magazine

april assembly cover

2014 April

The 2014 April Assembly includes a cover story about robots and small manufacturers plus much more. Check it out today!
Table Of Contents Subscribe

Immigration Reform

Could immigration reform benefit U.S. manufacturers?
View Results Poll Archive

THE ASSEMBLY MAGAZINE STORE

welding.gif
Welding: Principles & Practices

This text introduces students to a solid background in the basic principles and practices of welding.

More Products

Clear Seas Research

Clear Seas ResearchWith access to over one million professionals and more than 60 industry-specific publications,Clear Seas Research offers relevant insights from those who know your industry best. Let us customize a market research solution that exceeds your marketing goals.

Assembly Showrooms

ASSEMBLY Showrooms

STAY CONNECTED

facebook_40px twitter_40px  youtube_40pxlinkedin_40px