Free Webcast to Cover Jet-Dispensing of Lubricants

Engineers can learn how piezoelectric valves can be used to dispense lubricants during a free, hour-long webinar April 7.

Moderated by John Sprovieri, editor of ASSEMBLY, the webinar will be presented by Terry Dunbar, fluid jetting specialist for Nordson EFD.

Noncontact jet-dispensing saves time by eliminating Z-axis movement of the dispense head. This webinar will provide an overview of piezoelectric jetting valves and how they can be used to apply lubricants in various assembly processes.

During the webinar, engineers will learn:
*What piezoelectric valves are and how they work.

*The advantages and limitations of jet-dispensing.

*How to determine if your lubricant is a good candidate for jet-dispensing.
*What to do if a lubricant cannot be jet-dispensed.

The webinar will be broadcast live from 2 p.m. to 3 p.m., Eastern time. The presentation will run approximately 45 minutes. A live, 15-minute question-and-answer session will follow. Engineers who cannot attend the live broadcast will be able to view the on-demand.
To register, visithttp://webinar.assemblymag.com.

John has been with ASSEMBLY magazine since February 1997. John was formerly with a national medical news magazine, and has written for Pathology Today and the Green Bay Press-Gazette. John holds a B.A. in journalism from Northwestern University, Medill School of Journalism.

The ASSEMBLY Show South

ASSEMBLY is thrilled to return to the Music City Center in Nashville, TN for The ASSEMBLY Show SOUTH on May 1-2, 2024. This is a booming time for manufacturing and the U.S. South is right in the heart of the action. According to ASSEMBLY’s most recent annual capital spending survey, the South is projected to account for 31 percent of total spending this year, marking the fifth straight year this region has accounted for at least 30 percent of capital spending in the U.S.

In this session, manufacturers will learn how Quality function deployment (QFD) can transform consumers’ qualitative demands into quantitative parameters that will shape the design of their product and, ultimately, their manufacturing process.

Sponsored by: