Refine your results by
Automated Assembly Systems Panel Discussion
10/4/22 2:00 pm to 10/4/23 2:00 pm EDT
Available On Demand until October 4, 2023
According to ASSEMBLY’s annual Capital Equipment Spending Survey, 25 percent of U.S. factories make more than 1 million products annually. The only way to meet that kind of volume is with automation.
Whether your company assembles auto parts, consumer products or medical devices, The ASSEMBLY Show is the place to be to get the ball rolling on an automated assembly project. At least 10 systems integrators are exhibiting at the show, along with numerous suppliers of parts feeding equipment, indexers, conveyors, robots and other automation technologies.
With the cost of automated assembly systems running six or even seven figures, choosing the right integrator and establishing a good relationship are critical. So, before you visit the show floor, tune into this exclusive panel discussion featuring executives from four of the top systems integrators in North America: Arthur G. Russell Co. Inc., ATS Automation Tooling Systems Inc., IMA Automation North America and Lanco Integrated.
Learning Objectives:
Whether your company assembles auto parts, consumer products or medical devices, The ASSEMBLY Show is the place to be to get the ball rolling on an automated assembly project. At least 10 systems integrators are exhibiting at the show, along with numerous suppliers of parts feeding equipment, indexers, conveyors, robots and other automation technologies.
With the cost of automated assembly systems running six or even seven figures, choosing the right integrator and establishing a good relationship are critical. So, before you visit the show floor, tune into this exclusive panel discussion featuring executives from four of the top systems integrators in North America: Arthur G. Russell Co. Inc., ATS Automation Tooling Systems Inc., IMA Automation North America and Lanco Integrated.
Learning Objectives:
- Explain how to choose and work with a systems integrator.
- Describe how to write an RFQ and how to evaluate proposed designs.
- Identify the differences between synchronous and asynchronous assembly systems.
- Discuss tips and tricks for designing products to facilitate automated assembly.
- Assess how Industry 4.0 concepts are influencing assembly system design.
Sponsored by:
 |  |
 |  |
 |
