Adhesives & Dispensing Assembly

RSS

STANFORD, CA—Stanford University researchers have developed a new adhesive that enables the cathodes of lithium-ion batteries last five times longer than earlier designs.

ROCKY HILL, CT—More than 40 Loctite distributors across the country will hold open houses this fall to highlight their newly updated equipment showrooms.

For mass-production on assembly lines, UV- and light-curing adhesives offer significant advantages over other joining methods.

The latest generation of pressure-sensitive adhesives and converted materials offer great potential for product improvement. They hold the key to better product performance, greater manufacturing efficiencies, better staff utilization, and ultimately across-the-board cost reduction.

ADELAIDE, Australia—Electrolux has implemented a vision-guided robotic assembly cell to improve the production of oven doors.

CARLSBAD, CA—Systems integrator Automation GT has built a multistation automated assembly system to make syringes. Designed for use in a Class 10,000 clean room, the system includes robots, vision systems and dispensing equipment.

Dispensing a one-part adhesive is easy. You only have to worry about the viscosity of the material, the flow rate, and how you want the material to be applied to the part.

The conformal coating Parylene has long been known for its excellent dielectric strength, high thermal stability (up to 450 C), dry-film lubricity and outstanding chemical resistance. Those properties have made the material a staple for coating printed circuit boards and electronic devices exposed to environmental extremes.

Steel is not about to disappear anytime soon as the dominant material used in the home appliance industry. Unlike automakers, which are turning to aluminum, carbon-fiber composites, magnesium, plastic and other lightweight materials, steel still rules in the world of refrigerators, dishwashers and dryers.

Initiating movement of a standard bicycle can sometimes be challenging, such as when peddling up steep hills. Initiating movement of an electric bicycle, on the other hand, has always been much easier. The rider either pedal-assists the motor or activates it with a throttle.