Auto-Kabel, the global automotive supplier, manufactures cable and lead sets for power supply applications. The friction welding machines deployed in the process must always have an adequate supply of material without excessive safety stocks.

Companies measure success in several ways. One of the most important measurements is their number of repeat customers. For wire harness shops, the best way to gain repeat customers is to provide them an ongoing supply of harnesses that are high quality, economical and specifically designed to meet each application challenge.

ASSEMBLY was born in October 1958 with the name Assembly & Fastener Engineering. Although its name was later shortened to Assembly Engineering, and subsequently to ASSEMBLY, it was then, and is today, a magazine of ideas and methods.

Market expansion has always been a priority for Connor Solutions Ltd. So it's no surprise that in less than 20 years, the Tyne and Wear, England-based company has become one of the largest privately held electronics manufacturing services (EMS) providers in the UK.

Before the availability of electric lights, early automobiles were equipped with gas lamps for headlights and oil lamps for taillights. Electric lights did not become commonplace until the 1920s.

Semiconductor device fabrication is a complex, multistep process involving both photolithographic and chemical techniques.

When people board an airplane, they bring with them the need for wireless data. This need, according to technology experts, is quite extensive: Trillions of megabytes of data annually for millions of continuous inflight calls, texts, chats, games and video conferences.

TAIWAN—Apple Inc.’s contract manufacturer for chipsets for its iPhones, Taiwan Semiconductor Manufacturing Co., has been hit by a virus attack and production badly affected. Sources for the manufacturing company indicate that this was not a cyberattack by any outside hacker and to that extent, sabotage is not suspected.

Makers of printed circuit boards aren’t the only manufacturers interested in packing more power into a smaller space.

Taken literally, the terms "accurate dispensing" and "dispensing with accuracy" are not interchangeable. In practice, however, manufacturers and their machine operators know that the words describe the same desired result: Dispensing an exact amount of material, at a specified location, on a repeatable basis